123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122 |
- /*!
- \file gd32e23x_dbg.h
- \brief definitions for the DBG
-
- \version 2019-02-19, V1.0.0, firmware for GD32E23x
- \version 2020-12-12, V1.1.0, firmware for GD32E23x
- */
- /*
- Copyright (c) 2020, GigaDevice Semiconductor Inc.
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holder nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- OF SUCH DAMAGE.
- */
- #ifndef GD32E23X_DBG_H
- #define GD32E23X_DBG_H
- #include "gd32e23x.h"
- /* DBG definitions */
- #define DBG DBG_BASE
- /* registers definitions */
- #define DBG_ID REG32(DBG + 0x00U) /*!< DBG_ID code register */
- #define DBG_CTL0 REG32(DBG + 0x04U) /*!< DBG control register 0 */
- #define DBG_CTL1 REG32(DBG + 0x08U) /*!< DBG control register 1 */
- /* bits definitions */
- /* DBG_ID */
- #define DBG_ID_ID_CODE BITS(0,31) /*!< DBG ID code values */
- /* DBG_CTL0 */
- #define DBG_CTL0_SLP_HOLD BIT(0) /*!< keep debugger connection during sleep mode */
- #define DBG_CTL0_DSLP_HOLD BIT(1) /*!< keep debugger connection during deepsleep mode */
- #define DBG_CTL0_STB_HOLD BIT(2) /*!< keep debugger connection during standby mode */
- #define DBG_CTL0_FWDGT_HOLD BIT(8) /*!< debug FWDGT kept when core is halted */
- #define DBG_CTL0_WWDGT_HOLD BIT(9) /*!< debug WWDGT kept when core is halted */
- #define DBG_CTL0_TIMER0_HOLD BIT(10) /*!< TIMER0 counter kept when core is halted */
- #define DBG_CTL0_TIMER2_HOLD BIT(12) /*!< TIMER2 counter kept when core is halted */
- #define DBG_CTL0_I2C0_HOLD BIT(15) /*!< hold I2C0 smbus when core is halted */
- #define DBG_CTL0_I2C1_HOLD BIT(16) /*!< hold I2C1 smbus when core is halted */
- #define DBG_CTL0_TIMER5_HOLD BIT(19) /*!< hold TIMER5 counter when core is halted */
- #define DBG_CTL0_TIMER13_HOLD BIT(27) /*!< hold TIMER13 counter when core is halted */
- /* DBG_CTL1 */
- #define DBG_CTL1_RTC_HOLD BIT(10) /*!< hold RTC calendar and wakeup counter when core is halted */
- #define DBG_CTL1_TIMER14_HOLD BIT(16) /*!< hold TIMER14 counter when core is halted */
- #define DBG_CTL1_TIMER15_HOLD BIT(17) /*!< hold TIMER15 counter when core is halted */
- #define DBG_CTL1_TIMER16_HOLD BIT(18) /*!< hold TIMER16 counter when core is halted */
- /* constants definitions */
- #define DBG_LOW_POWER_SLEEP DBG_CTL0_SLP_HOLD /*!< keep debugger connection during sleep mode */
- #define DBG_LOW_POWER_DEEPSLEEP DBG_CTL0_DSLP_HOLD /*!< keep debugger connection during deepsleep mode */
- #define DBG_LOW_POWER_STANDBY DBG_CTL0_STB_HOLD /*!< keep debugger connection during standby mode */
- /* define the peripheral debug hold bit position and its register index offset */
- #define DBG_REGIDX_BIT(regidx, bitpos) (((regidx) << 6) | (bitpos))
- #define DBG_REG_VAL(periph) (REG32(DBG + ((uint32_t)(periph) >> 6)))
- #define DBG_BIT_POS(val) ((uint32_t)(val) & 0x1FU)
- /* register index */
- enum dbg_reg_idx
- {
- DBG_IDX_CTL0 = 0x04U,
- DBG_IDX_CTL1 = 0x08U,
- };
- /* peripherals hold bit */
- typedef enum
- {
- DBG_FWDGT_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 8U), /*!< FWDGT hold bit */
- DBG_WWDGT_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 9U), /*!< WWDGT hold bit */
- DBG_TIMER0_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 10U), /*!< TIMER0 hold bit */
- DBG_TIMER2_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 12U), /*!< TIMER2 hold bit */
- DBG_TIMER5_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 19U), /*!< TIMER5 hold bit */
- DBG_TIMER13_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 27U), /*!< TIMER13 hold bit */
- DBG_TIMER14_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 16U), /*!< TIMER14 hold bit */
- DBG_TIMER15_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 17U), /*!< TIMER15 hold bit */
- DBG_TIMER16_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 18U), /*!< TIMER16 hold bit */
- DBG_I2C0_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 15U), /*!< I2C0 hold bit */
- DBG_I2C1_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL0, 16U), /*!< I2C1 hold bit */
- DBG_RTC_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 10U), /*!< RTC hold bit */
- }dbg_periph_enum;
- /* function declarations */
- /* deinitialize the DBG */
- void dbg_deinit(void);
- /* read DBG_ID code register */
- uint32_t dbg_id_get(void);
- /* enable low power behavior when the MCU is in debug mode */
- void dbg_low_power_enable(uint32_t dbg_low_power);
- /* disable low power behavior when the MCU is in debug mode */
- void dbg_low_power_disable(uint32_t dbg_low_power);
- /* enable peripheral behavior when the MCU is in debug mode */
- void dbg_periph_enable(dbg_periph_enum dbg_periph);
- /* disable peripheral behavior when the MCU is in debug mode */
- void dbg_periph_disable(dbg_periph_enum dbg_periph);
- #endif /* GD32E23X_DBG_H */
|