123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192 |
- /*!
- \file GD32e23x_syscfg.h
- \brief definitions for the SYSCFG
- \version 2019-02-19, V1.0.0, firmware for GD32E23x
- \version 2020-12-12, V1.1.0, firmware for GD32E23x
- */
- /*
- Copyright (c) 2020, GigaDevice Semiconductor Inc.
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holder nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- OF SUCH DAMAGE.
- */
- #ifndef GD32E23X_SYSCFG_H
- #define GD32E23X_SYSCFG_H
- #include "gd32e23x.h"
- /* SYSCFG definitions */
- #define SYSCFG SYSCFG_BASE
- /* registers definitions */
- #define SYSCFG_CFG0 REG32(SYSCFG + 0x00U) /*!< system configuration register 0 */
- #define SYSCFG_EXTISS0 REG32(SYSCFG + 0x08U) /*!< EXTI sources selection register 0 */
- #define SYSCFG_EXTISS1 REG32(SYSCFG + 0x0CU) /*!< EXTI sources selection register 1 */
- #define SYSCFG_EXTISS2 REG32(SYSCFG + 0x10U) /*!< EXTI sources selection register 2 */
- #define SYSCFG_EXTISS3 REG32(SYSCFG + 0x14U) /*!< EXTI sources selection register 3 */
- #define SYSCFG_CFG2 REG32(SYSCFG + 0x18U) /*!< system configuration register 2 */
- #define SYSCFG_CPU_IRQ_LAT REG32(SYSCFG + 0x100U) /*!< IRQ Latency register */
- /* SYSCFG_CFG0 bits definitions */
- #define SYSCFG_CFG0_BOOT_MODE BITS(0,1) /*!< SYSCFG memory remap config */
- #define SYSCFG_CFG0_PA11_PA12_RMP BIT(4) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins) */
- #define SYSCFG_CFG0_ADC_DMA_RMP BIT(8) /*!< ADC DMA remap config */
- #define SYSCFG_CFG0_USART0_TX_DMA_RMP BIT(9) /*!< USART0 Tx DMA remap config */
- #define SYSCFG_CFG0_USART0_RX_DMA_RMP BIT(10) /*!< USART0 Rx DMA remap config */
- #define SYSCFG_CFG0_TIMER15_DMA_RMP BIT(11) /*!< TIMER 15 DMA remap config */
- #define SYSCFG_CFG0_TIMER16_DMA_RMP BIT(12) /*!< TIMER 16 DMA remap config */
- #if defined(GD32E230)
- #define SYSCFG_CFG0_PB9_HCCE BIT(19) /*!< PB9 pin high current capability enable */
- #endif
- /* SYSCFG_EXTISS0 bits definitions */
- #define SYSCFG_EXTISS0_EXTI0_SS BITS(0,3) /*!< EXTI 0 configuration */
- #define SYSCFG_EXTISS0_EXTI1_SS BITS(4,7) /*!< EXTI 1 configuration */
- #define SYSCFG_EXTISS0_EXTI2_SS BITS(8,11) /*!< EXTI 2 configuration */
- #define SYSCFG_EXTISS0_EXTI3_SS BITS(12,15) /*!< EXTI 3 configuration */
- /* SYSCFG_EXTISS1 bits definitions */
- #define SYSCFG_EXTISS1_EXTI4_SS BITS(0,3) /*!< EXTI 4 configuration */
- #define SYSCFG_EXTISS1_EXTI5_SS BITS(4,7) /*!< EXTI 5 configuration */
- #define SYSCFG_EXTISS1_EXTI6_SS BITS(8,11) /*!< EXTI 6 configuration */
- #define SYSCFG_EXTISS1_EXTI7_SS BITS(12,15) /*!< EXTI 7 configuration */
- /* SYSCFG_EXTISS2 bits definitions */
- #define SYSCFG_EXTISS2_EXTI8_SS BITS(0,3) /*!< EXTI 8 configuration */
- #define SYSCFG_EXTISS2_EXTI9_SS BITS(4,7) /*!< EXTI 9 configuration */
- #define SYSCFG_EXTISS2_EXTI10_SS BITS(8,11) /*!< EXTI 10 configuration */
- #define SYSCFG_EXTISS2_EXTI11_SS BITS(12,15) /*!< EXTI 11 configuration */
- /* SYSCFG_EXTISS3 bits definitions */
- #define SYSCFG_EXTISS3_EXTI12_SS BITS(0,3) /*!< EXTI 12 configuration */
- #define SYSCFG_EXTISS3_EXTI13_SS BITS(4,7) /*!< EXTI 13 configuration */
- #define SYSCFG_EXTISS3_EXTI14_SS BITS(8,11) /*!< EXTI 14 configuration */
- #define SYSCFG_EXTISS3_EXTI15_SS BITS(12,15) /*!< EXTI 15 configuration */
- /* SYSCFG_CFG2 bits definitions */
- #define SYSCFG_CFG2_LOCKUP_LOCK BIT(0) /*!< enable and lock the LOCKUP (Hardfault) output of Cortex-M23 with break input of TIMER0/14/15/16 */
- #define SYSCFG_CFG2_SRAM_PARITY_ERROR_LOCK BIT(1) /*!< enable and lock the SRAM_PARITY error signal with break input of TIMER0/14/15/16 */
- #define SYSCFG_CFG2_LVD_LOCK BIT(2) /*!< enable and lock the LVD connection with TIMER0 break input and also the LVD_EN and LVDSEL[2:0] bits of the power control interface */
- #define SYSCFG_CFG2_SRAM_PCEF BIT(8) /*!< SRAM parity check error flag */
- /* SYSCFG_CPU_IRQ_LAT bits definitions */
- #define SYSCFG_CPU_IRQ_LAT_IRQ_LATENCY BITS(0,7) /*!< IRQ_LATENCY specifies the minimum number of cycles between an interrupt */
- /* constants definitions */
- /* DMA remap definitions */
- #define SYSCFG_PA11_REMAP_PA12 SYSCFG_CFG0_PA11_PA12_RMP /*!< PA11 PA12 remap */
- #define SYSCFG_DMA_REMAP_ADC SYSCFG_CFG0_ADC_DMA_RMP /*!< ADC DMA remap */
- #define SYSCFG_DMA_REMAP_USART0TX SYSCFG_CFG0_USART0_TX_DMA_RMP /*!< USART0_TX DMA remap */
- #define SYSCFG_DMA_REMAP_USART0RX SYSCFG_CFG0_USART0_RX_DMA_RMP /*!< USART0_RX DMA remap */
- #define SYSCFG_DMA_REMAP_TIMER15 SYSCFG_CFG0_TIMER15_DMA_RMP /*!< TIMER15 DMA remap */
- #define SYSCFG_DMA_REMAP_TIMER16 SYSCFG_CFG0_TIMER16_DMA_RMP /*!< TIMER16 DMA remap */
- #if defined(GD32E230)
- /* high current definitions */
- #define SYSCFG_HIGH_CURRENT_ENABLE SYSCFG_CFG0_PB9_HCCE /*!< high current enable */
- #define SYSCFG_HIGH_CURRENT_DISABLE (~SYSCFG_CFG0_PB9_HCCE) /*!< high current disable */
- #endif
- /* EXTI source select definition */
- #define EXTISS0 ((uint8_t)0x00U) /*!< EXTI source select register 0 */
- #define EXTISS1 ((uint8_t)0x01U) /*!< EXTI source select register 1 */
- #define EXTISS2 ((uint8_t)0x02U) /*!< EXTI source select register 2 */
- #define EXTISS3 ((uint8_t)0x03U) /*!< EXTI source select register 3 */
- /* EXTI source select mask bits definition */
- #define EXTI_SS_MASK BITS(0,3) /*!< EXTI source select mask */
- /* EXTI source select jumping step definition */
- #define EXTI_SS_JSTEP ((uint8_t)(0x04U)) /*!< EXTI source select jumping step */
- /* EXTI source select moving step definition */
- #define EXTI_SS_MSTEP(pin) (EXTI_SS_JSTEP * ((pin) % EXTI_SS_JSTEP)) /*!< EXTI source select moving step */
- /* EXTI source port definitions */
- #define EXTI_SOURCE_GPIOA ((uint8_t)0x00U) /*!< EXTI GPIOA configuration */
- #define EXTI_SOURCE_GPIOB ((uint8_t)0x01U) /*!< EXTI GPIOB configuration */
- #define EXTI_SOURCE_GPIOC ((uint8_t)0x02U) /*!< EXTI GPIOC configuration */
- #define EXTI_SOURCE_GPIOF ((uint8_t)0x05U) /*!< EXTI GPIOF configuration */
- /* EXTI source pin definitions */
- #define EXTI_SOURCE_PIN0 ((uint8_t)0x00U) /*!< EXTI GPIO pin0 configuration */
- #define EXTI_SOURCE_PIN1 ((uint8_t)0x01U) /*!< EXTI GPIO pin1 configuration */
- #define EXTI_SOURCE_PIN2 ((uint8_t)0x02U) /*!< EXTI GPIO pin2 configuration */
- #define EXTI_SOURCE_PIN3 ((uint8_t)0x03U) /*!< EXTI GPIO pin3 configuration */
- #define EXTI_SOURCE_PIN4 ((uint8_t)0x04U) /*!< EXTI GPIO pin4 configuration */
- #define EXTI_SOURCE_PIN5 ((uint8_t)0x05U) /*!< EXTI GPIO pin5 configuration */
- #define EXTI_SOURCE_PIN6 ((uint8_t)0x06U) /*!< EXTI GPIO pin6 configuration */
- #define EXTI_SOURCE_PIN7 ((uint8_t)0x07U) /*!< EXTI GPIO pin7 configuration */
- #define EXTI_SOURCE_PIN8 ((uint8_t)0x08U) /*!< EXTI GPIO pin8 configuration */
- #define EXTI_SOURCE_PIN9 ((uint8_t)0x09U) /*!< EXTI GPIO pin9 configuration */
- #define EXTI_SOURCE_PIN10 ((uint8_t)0x0AU) /*!< EXTI GPIO pin10 configuration */
- #define EXTI_SOURCE_PIN11 ((uint8_t)0x0BU) /*!< EXTI GPIO pin11 configuration */
- #define EXTI_SOURCE_PIN12 ((uint8_t)0x0CU) /*!< EXTI GPIO pin12 configuration */
- #define EXTI_SOURCE_PIN13 ((uint8_t)0x0DU) /*!< EXTI GPIO pin13 configuration */
- #define EXTI_SOURCE_PIN14 ((uint8_t)0x0EU) /*!< EXTI GPIO pin14 configuration */
- #define EXTI_SOURCE_PIN15 ((uint8_t)0x0FU) /*!< EXTI GPIO pin15 configuration */
- /* lock definitions */
- #define SYSCFG_LOCK_LOCKUP SYSCFG_CFG2_LOCKUP_LOCK /*!< LOCKUP output lock */
- #define SYSCFG_LOCK_SRAM_PARITY_ERROR SYSCFG_CFG2_SRAM_PARITY_ERROR_LOCK /*!< SRAM parity error lock */
- #define SYSCFG_LOCK_LVD SYSCFG_CFG2_LVD_LOCK /*!< LVD lock */
- /* SRAM parity check error flag definitions */
- #define SYSCFG_SRAM_PCEF SYSCFG_CFG2_SRAM_PCEF /*!< SRAM parity check error flag */
- /* SYSCFG_CPU_IRQ_LAT register IRQ_LATENCY value */
- #define IRQ_LATENCY(regval) (BITS(0,7) & ((uint32_t)(regval) << 0U)) /*!< write value to IRQ_LATENCY bits field */
- /* function declarations */
- /* deinit syscfg module */
- void syscfg_deinit(void);
- /* enable the DMA channels remapping */
- void syscfg_dma_remap_enable(uint32_t syscfg_dma_remap);
- /* disable the DMA channels remapping */
- void syscfg_dma_remap_disable(uint32_t syscfg_dma_remap);
- #if defined(GD32E230)
- /* enable PB9 high current capability */
- void syscfg_high_current_enable(void);
- /* disable PB9 high current capability */
- void syscfg_high_current_disable(void);
- #endif
- /* configure the GPIO pin as EXTI Line */
- void syscfg_exti_line_config(uint8_t exti_port, uint8_t exti_pin);
- /* connect TIMER0/14/15/16 break input to the selected parameter */
- void syscfg_lock_config(uint32_t syscfg_lock);
- /* set the IRQ_LATENCY value */
- void irq_latency_set(uint8_t irq_latency);
- /* check if the specified flag in SYSCFG_CFG2 is set or not */
- FlagStatus syscfg_flag_get(uint32_t syscfg_flag);
- /* clear the flag in SYSCFG_CFG2 by writing 1 */
- void syscfg_flag_clear(uint32_t syscfg_flag);
- #endif /* GD32E23X_SYSCFG_H */
|